Baby Lock Spirit (BLPY) Instruction and Reference Guide - Manual (Page 93)

ADJUSTMENTS DURING THE EMBROIDERY PROCESS
Em
br
oide
ry
Embroidering E-27
E
1
If the Thread Breaks During
Sewing
a
Press the “Start/Stop” button to stop the
machine.
b
If the upper thread is broken, redo the
upper threading. If the bobbin thread is
broken, press and follow the
directions in steps
a
through
e
from the
previous section to reset the bobbin.
c
Press .
d
Press , , , or to move
the needle back the correct number of
stitches before the spot where the thread
broke.
* If you cannot move back to the spot where the
thread broke, press to select the color and
move to the beginning position of that color, then
use , , , or to move ahead
to slightly before where the thread broke.
e
Press to return to the original screen.
f
Press the “Presser Foot Lifter” button to
lower the presser foot, and press the
“Start/Stop” button to continue sewing.