Repeating one element of a repeated pattern, E-74 – Baby Lock Spirit (BLPY) Instruction and Reference Guide User Manual
Page 140

EDITING PATTERNS
E-74
e
Adjust the spacing of the repeated pattern.
*
To widen spacing, press
.
*
To tighten spacing, press
.
a Press
to change a repeated pattern back to
one single pattern.
f
Complete repeated patterns by repeating
steps
c
through
e
.
g
Press
to finish repeating.
■ Repeating One Element of a
Repeated Pattern
By using the Cut function, you can select one
element of a repeated pattern and repeat only that
single element. This function allows you to design
complex repeated patterns.
a
Choose the direction in which the repeated
pattern will be cut.
*
Press
to cut horizontally.
*
Press
to cut vertically.
→ The pattern direction indicator will change
depending on the direction selected.
b
Use
and
to select the cut line.
→ The cut line will move.
Memo
• You can only adjust the spacing of patterns
included in the red frame.
Memo
• When there are two or more patterns, all
patterns will be grouped together as one
pattern in the red frame.
• When changing the direction in which the
pattern will be repeated, all of the patterns
in the red frame will automatically be
grouped as one repeating unit. Press
to change a repeated pattern back to one
single pattern. See the following section on
how to repeat one element of a repeated
pattern.
a