Audio Enhancement Product Manual - Manual (Page 33)

Setting the EMG
Aux Mute on the Innovator
Caution:
Wiring for the ENG Input are fixed to the screw terminals . The torque for the screws are
0 .98 N. m ± 0 .1 N. m (10 kgf. cm ± 1 kgf. cm) .
Be sure to switch the amplifier off before connecting the wires . Carefully check the
polarities before connecting . Connection to the wrong polarity may prevent the
amplifier from functioning correctly .
The mute function works as shown:
Volume
Auxiliary input level
Screw terminals
Auxiliary input
levels reduced by 12 dB
Muting of auxiliary input starts
Mute finished
when input is
turned off
Auxiliary input volume
returns to original level
after approximately 2
seconds
Time
33