Audio Enhancement Product Manual - Manual (Page 27)

27
Operating Procedure
Press to INCREASE the volume of
the selected source .
Press to DECREASE the volume of
the selected source .
Press the SELECT button until
the blue LED is lit over the
desired source .
The volume level of the infrared wireless microphone and the auxiliary inputs* can be controlled
from the teardrop infrared wireless transmitter .
First, adjust the volume to an appropriate level with the receiver/amplifier system controls .
Once the initial volume levels are set, the teacher can then adjust the level of his or her OWN
microphone, the OTHER infrared wireless microphone in the classroom, or the auxiliary LINE
input volume level . (The teacher’s teardrop microphone is the only microphone that has
infrared remote control of the receiver/amplifier .)
Adjusting the level of the audio signal output from the receiver:
1 . Choose to adjust the volume of your OWN microphone, the OTHER microphone or LINE by
selecting OWN, OTHER or LINE by pressing the SELECT button until the blue LED is lit for the
desired source .
2 . Once the desired source is selected press the volume up/down buttons .
• To increase the volume level, press the up arrow button.
• To decrease the volume level, press the down arrow button.
Notes:
• The level is adjusted in 2 dB steps from +6 dB to –16 dB .
• These electronic adjustments are automatically reset to zero when the receiver/
amplifier is turned off .
• *The aux LINE input volume control is intended for use with the Innovator, Ultimate
IISE and SoloSolution receiver/amplifier .