American Time Wireless Controller - Manual (Page 8)

© American Time
8
SiteSync IQ Wireless Controller
Installation Manual
Operation
Appendix
Tr
oubleshooting
Operation
Contr
oller
Installation
Intr
oduction
Testing Wireless Operation of Signal Circuits
Signal circuits can be controlled manually with the MAN key on the SiteSync IQ System Controller acting as a momentary push-
button switch. To initiate manual wireless control:
Using the SiteSync IQ System Controller
u
Press MAN, enter User Lock (unless User Lock is disabled) and press OK (unless User Lock is disabled).
n Note: If circuit numbers are not highlighted, press 0 to select wireless circuit activation.
v
Press any combination of keys 1-4 to select or deselect the circuits to be turned on with the MAN key. The MAN key can be
pressed as many times as needed. Control of the signal circuits reverts to its previous state (AUTO or OFF) upon exiting
this menu.
n Note: Reference Setting Signal Circuit Schedule and Duration in SiteSync IQ System Controller Operation Manual.
n Note: Upon pressing MAN, a TX will appear in the upper right hand corner to signify that the wireless activation is being
transmitted.
n Note: The Remote Connect Web Interface may also be used to manually activate circuits via the Circuit tab..
n Note: For AUTO operation, reference the SiteSync IQ Operation Manual (Part # H004095)
Manual Signal TX
Select Circuits: 0=WL 7=All
Circuit: 1234567
Man=Signal OK=Exit