American Time Wired Audio Generator - Manual (Page 9)

9
© American Time
Wired Audio Generator
Installation Manual
W
iring
Configurations
Operation
Inputs/Outputs
Intr
oduction
Wiring Configurations
Wiring Configuration 1
One of the most common applications for the Audio Generator is to wire it directly to the bell circuits of the SiteSync IQ system
controller. Here, background music (BGM) from another source can also be played through the Audio Generator to a PA system
while the MP3 files are not being triggered or played. The following are four examples of this configuration.
Example 1-1
In this example, a SiteSync IQ system controller can trigger the Audio Generator to play 6 specific MP3 files.
Example: A school is playing 3 of 6 different bell tones at specific times during the day.
•At 8:00 a.m. a morning, or start of day, a custom bell/tone is played (1.mp3)
•At 12:00 p.m. a lunch time a custom bell/tone is played (2.mp3)
•At 4:15 p.m. an end of day a custom bell/tone is played (3.mp3)
Example of Schedule for SiteSync IQ system controller:
Audio Generator DIP Switch Settings
Position 5 OFF Standard
Positon 6 OFF Play Once
Event Tab
Circuit Tab
See wiring on page 10