American Time Wired Audio Generator - Manual (Page 7)

7
© American Time
Wired Audio Generator
Installation Manual
W
iring
Configurations
Operation
Inputs/Outputs
Intr
oduction
Inputs/Outputs
The bottom of the Audio Generator (Figure 3)
The bottom of the Audio Generator is where the MP3 playing preferences and volume controls are located.
The 10 position DIP switch on the bottom of the device is how the user sets their MP3 playing preferences, such as Rotate
or Continuous play. For basic operation, position 5 and 6 can be set to OFF or ON, while the rest of the DIP switch positions
must be set to OFF.
The Message and BGM volume adjustments located on the bottom of the Audio Generator should only have to be adjusted
once during initial setup with the PA or amplifier system. The volume out of the speaker should be controlled by the PA or
amplifier volume control and not the Audio Generator.
w
Figure 3
DIP Switch
Position
Position Settings
1-4 OFF
5 ON: Rotate position - When position 5 is in the ON position, the Audio Generator will rotate through the
files 1.mp3 - 8.mp3 one each time the unit is triggered.
OFF: Standard position - When position 5 is in the OFF position, the Audio Generator will play only the
MP3 file (1.mp3 - 8.mpe) which is related to the input triggered.
Example: Triggering input 5 will only play MP3 file 5.mp3
6 ON: Continuous Play - When position 6 is in the ON position, the Audio Generator continues to play the
trigger MP3 file as long as there is a closed connection between the GND and triggering input 1-8.
OFF: Play Once - When position 6 is in the OFF position, the Audio Generator will play the triggered MP3
file only once.
7-10 OFF
DIP Switch Settings