Tempest Hurricane - Manual (Page 44)

Hurricane Enclosure User Manual page 44
Important – RDM and RDM Integration
RDM (Remote Device Management) is an ANSI standard that adds bidirectional discovery and
status monitoring to a standard DMX network connection. No additional wiring is required for
RDM operation.
DEC3’s RDM implementation allows system integrators to set up remote control and status
monitoring of all attributes and sensors, including:
• Temperature
• Humidity
• Lamp Current
• Elapsed Lamp Hours
• Lamp Relay Status
• Fan Relay Status
• Heater Relay Status
• DMX Status
• DMX Start Address
• DMX Personality (RDM Mode)
• Device Type
• Device Label
• Software Version
Tempest Lighting warrants that its RDM products are compliant to the RDM standard, but does not
directly support RDM system integration. Tempest Lighting will however provide introductions to
qualified RDM system integrators for customers requiring assistance in this area. Links are
provided on the Tempest Lighting web site (www.tempestlighting.com).
DEC-3 RDM Supported parameters
DEVICE -INFO
IDENTIFY -DEVICE
DMX -START -ADDRESS
SOFTWARE -VERSION-LABEL
PARAMETER -DESCRIPTION
QUEUED -MESSAGE
STATUS -MESSAGES
STATUS -ID -DESCRIPTION
CLEAR -STATUS -ID
MANUFACTURER -LABEL
DEVICE -LABEL
SENSOR -DEFINITION
SENSOR -VALUE
LAMP - HOURS
DEVICE -MODEL -DESCRIPTION
SLOT -INFO
SLOT -DESCRIPTION
DMX -PERSONALITY
DMX -PERSONALITY -DESCRIPTION
TOP TEMP
BOTTOM TEMP
CUTOFF TEMP