Waveform editors, 1 standard waveform editor, The math editor – Dataman 530 Series User Manual
Page 25: 1 standard waveform editor 5.2. the math editor, Fig. 5.1.1 .- the standard waveform editor screen
DATAMAN 530 series AWG
User’s Guide
5. Waveform editors
Following editors are available for waveform creation and/or modification:
- Standard waveform editor
- Math editor
- Freeform editor
- Import from ASCII file
Please see chapter 4.4 for instructions how to activate them.
5.1 Standard waveform editor
This editor can create “sine”, “saw”, “triangle”, “square”, “noise” signals.
Fig. 5.1.1 .- The standard waveform editor screen
The “Duty cycle” parameter can be specified for triangle and square. Enter the
number from 0 to 100 to this edit box.
5.2. The Math editor
The Math editor can work in two operating modes. Clicking the “Advanced mode”
check box selects the operating mode. If the “Advanced mode” is off, several options
are not available (it is not possible to compose the waveform from several separate
formulas, it is not possible to use constants Y and Z).
- 25 -