Brennenstuhl Power Jet-Light 3 x 36 Watt IP54 spotlight 5m H07RN-F 3G1,5 3x2920lm Energy efficiency class A - Manual (Page 17)

Power Jet-Light 3 x 36 W IP 54
Operating Manual 17 GB
6.1 Initial Operation
Step Activity
1 Plug the standing bracket on to the retaining bracket. Bolt the U-Bolt structure with the
U-Bolts.
Pos. Name
6 Standing bracket (U-Bolt structure)
9 Adjusting screw
16 Bolt spacer
13 Casing (Lamp body)
22 Washer
23 Lock
washer
2
Fasten the lamp body in the middle of the U-bolt structure. For this purpose use the bolt
spacer and the adjusting screw. The light bracket can be set through the adjusting screw.
IMPORTANT: Before the initial operation, check all the bolted connections.
3 Press the ON / OFF switch. The work lamp will be switched on or off accordingly.
6.2 Change Illuminant
DANGER:
Pull the mains plug before opening the work lamp!
Let the work lamp cool before touching it (at least 15 minutes).
Coming into contact can lead to burns.
Step Activity
Set the work lamp on its „back“. Press the rubber lip upwards.
Pos. Name
3 Protective cover
11 Rubber lip
13 Casing (Lamp body)
1
Screw out the 4 protective covering bolts from the protective cover. Remove the protective
cover.
Pos. Name
3 Protective cover
11 Rubber lip
2 Protective cover bolt
2
3
11
13
3
11
2
9
6
16 13 22 23