Brennenstuhl Power Jet-Light 3 x 36 Watt IP54 spotlight 5m H07RN-F 3G1,5 3x2920lm Energy efficiency class A - Manual (Page 15)

Power Jet-Light 3 x 36 W IP 54
Operating Manual 15 GB
- Regularly check the work lamp for damages.
- The work lamp must be separated from the mains voltage in order for it to be replaced. Pull the
connector from the socket.
- Repairs should be carried out only by authorized personnel.
- Let the work lamp cool down before coming into contact (for example during replacement of the
illuminant).
- Observe a minimum distance of 50 cm on each side to combustible materials.
- Damaged cable line cannot be replaced. The work lamp is to be disposed appropriately.
- Never switch multiple shockproof sockets one after the other.
- Note the secure status of the work lamp.
4 Device overview
Below is a brief overview of the control panel and display of the device and a short functional description
Pos. Name Pos. Name
1 Retaining bracket 7 Connector
2 Protective cover bolt 8 Supply wiring
3 Protective cover 9 Adjusting screw (Quick release fastener)
4 Illuminant 10 Stirrup bolt
5 Socket 11 Rubber lip
6 Standing bracket
7
1
2
4
5
6
3
8
9
10
11