Waiter id’s (restaurants) – Ingenico ict220 User Manual
Page 28

Page 27
1. At the READY prompt press the MENU button twice.
2. Using the key to highlight the Select Function
option and then press the GREEN button.
3. Enter the number 40 and then press the GREEN button.
4. Swipe the Supervisor Card or enter your Supervisor code.
5. If you want to proceed to the Waiter Setup menu,press
the GREEN button. If not, press the YELLOW button to return
to the READY prompt.
6. Using the key, highlight Add and then press the
GREEN button.
7. Your terminal will automatically allocate the next
available Waiter ID. Key in the text/name description and
press the GREEN button (this field is limited to 10
characters).
(Please refer to
Section 5, ‘Entering Letters’ of this guide for instructions on how to enter letters).
A total of 99 waiters can be added.
28. Waiter ID’s (Restaurants)
Default Waiter 0
A default waiter, Waiter 0: SHARED will be created automatically by the terminal. This can be used if
you do not want to create individual Waiter ID’s.
All Sale transactions with gratuity will add tips/gratuities to this waiter without the need for a
waiter ID to be entered during transaction processing.
The total of all ‘Waiter 0’ tips/gratuities will be printed as part of the Waiter Totals Report showing
the total value of tips/gratuities performed.
Adding an Individual Waiter ID
Your terminal can be configured to recognise individual Waiter ID’s. These make it possible to
identify which staff member has dealt with the transaction. The Waiter ID will be printed on the
receipt.
SYSTEM MENU
Totals
Print Function Codes
Select Function
EFT
Waiter Setup?
Enter=YES Clear=NO
Change Name
Delete All
Create Defaults
WAITER SETUP
Delete
Add
ADD Waiter
Code nn
Key in Waiter’s Name
aaaaaaaaaa
and then press ENTER