Ingenico ict220 - Manual (Page 12)

Page 11
9. Press the GREEN button and the terminal will return to the READY prompt. If a re-print is required
press the MENU button.
PLEASE NOTE: Depending on the terminal configuration the full card number may not be printed on
the receipts.
7. Sale (Swiping a Card)
1. The customer should hand their card to you to swipe
through the terminal.
2. Once the card has been swiped the terminal will check
the card. You may be prompted to confirm the last four
digits of the card number. Key in the last four numbers
from the customer’s card and then press the GREEN button.
4. The customer should enter their PIN. As they do so
asterisks will appear on the screen.
If numbers are entered incorrectly during this process use
the YELLOW button to delete and then re-key the correct
PIN.
5. The terminal will now dial for authorisation and a
number of messages will appear on the screen.
6. The terminal will now print a receipt which the
CUSTOMER must retain for their records.
7. Tear off the receipt and press the GREEN button to
continue. Should you require a reprint of the receipt press
the MENU button.
8. You will now be prompted to remove the customer’s
card. The terminal will then print a MERCHANT receipt
which must be kept for your records.
Amount £25.00
PIN:
Cardholder to key PIN
Enter=OK Clear=REKEY
SALE
AUTH CODE: nnnnn
Printing
CUSTOMER RECEIPT
Please Wait...
Tear Off
CUSTOMER RECEIPT
Press ENTER if OK
Press MENU to Reprint
SALE
Please Remove Card
Printing
MERCHANT RECEIPT
Please Wait...
Tear Off
MERCHANT RECEIPT
Press ENTER if OK
Press MENU to Reprint
READY
Merchant Number
12345678
Key in last 4 digits
of Card Number
and then press ENTER