Lingenfelter L850181410 Camaro Grill Insert v0.8 - Manual (Page 7)

Page 6.
13. With the help of an assistant, place the
front fascia on a clean work surface as shown.
You will need access to both the inside and
outside of the fascia during this part of the
installation.
14. Using a small flat head screwdriver, un-clip
the clip on the fascia support webbing located in
the middle of the inside of the front fascia.
15. Un-clip the clip on the passenger side of
the fascia illustrated by bending the larger tab
(indicated by the arrow) away from the smaller
tab below it and pulling upward.
16. Un-clip the clip on the driver side
illustrated by bending the larger tab (indicated
by the arrow) away from the smaller tab below it
and pulling upward. Remove the fascia support
webbing.