Lingenfelter L850181410 Camaro Grill Insert v0.8 - Manual (Page 10)

Page
25. Re-connect the wiring harness electrical
connector on the inside of the front fascia.
26. Place the bumper onto the front of the
vehicle. Take care to not scratch the bumper or
quarter panels.
27. Using a 10 mm socket and ratchet, re-
install the two (2) lower support bolts and torque
to 62 in-lbs (7 N-m).
9.
28. Using a 10 mm socket, re-install the two
(2) bolts located inside the driver and passenger
side wheel wells. Torque these bolts to 62 in-lbs
(7 N-m)