Lingenfelter L820xxxxxx Lingenfelter Cadillac CTS Billet Pedal v1.1 User Manual

Page 7

background image

Page

12. If your vehicle has a parking brake pedal,

install the parking brake pedal cover. The same

procedure that was used to install the brake and

clutch pedals is used to install the parking brake

cover, except that only two (2) bolts and nuts will

be installed at the locations in the picture.

13. Vacuum out the metal shards and clear

away any other debris.

11. Mark the screw locations on the foot rest

and drill the pilot holes using the 1/8” drill bit.

Using a Phillips head screw driver and four (4)

of the self tapping screws included, screw on the

foot rest cover. Take care to ensure that the foot

rest cover is on straight and that it covers the

entire OEM foot rest.

6.

14. The installation of your LPE Pedal Covers

is now complete.

NOTE: Make sure to check the pedals

periodically to ensure that the fasteners have

not loosened over time.