Lingenfelter L820xxxxxx Lingenfelter Cadillac CTS Billet Pedal v1.1 User Manual
Page 4
Page 3.
1. Remove the clutch pedal rubber cover if
applicable by working the rubber tabs around the
back of the pedal and pulling the cover away from
the pedal.
2. Remove the brake pedal rubber cover by
working the rubber tabs around the back of the
pedal and pulling the cover away from the pedal.
Read the entire instruction manual before beginning installation. Some stock parts will
be used in reassembly.
When referencing the side of the vehicle, the driver side of the vehicle is considered the
left side and the passenger side of the vehicle is considered the right side of the vehicle.
The 2008-2012 CTS-V features a new electric parking brake system that utilizes a button
near the shifter to engage the parking brake. The parking brake pedal cover included in
the LPE 2008-2012 CTS pedal cover kits are for use on V6 equipped vehicles that have
a foot-operated parking brake (2008-2012 V6 CTS models ONLY). If this kit is being
installed on a 2008-2012 CTS-V, the parking brake pedal cover will not be installed.
WARNING:
The 2004-2007 CTS MT wide pedal kit (PN: L820090704) and the 2008-2012
CTS MT wide pedal kit (PN: L820110709) are intended for installation in race vehicles
ONLY. The width of the gas pedal is intended to better facilitate the Heel and Toe driving
technique. The close proximity of the gas and brake pedal covers included in this kit can
potentially lead to the gas pedal being inadvertently pressed while attempting to brake.