Sshhuuttddoowwnn ddiiaaggnnoossttiiccss, Lloonngg tteerrm m eevveenntt hhiissttoorryy – Directed Electronics SR6000 User Manual
Page 50
5
50
0
sshhuuttddoowwnn ddiiaaggnnoossttiiccss
1. With the ignition OFF, press and H
HO
OLLD
D the Valet/Program button.
2. Turn the ignition ON and then back OFF while H
HO
OLLD
DIIN
NG
G the Valet/Program button.
3. Release the Valet/Program button.
4. Press and release the Valet/Program button. The LED will report the last shutdown for one minute or until
the ignition is turned on.
lloonngg tteerrm
m eevveenntt hhiissttoorryy
The system stores the last two full triggers in memory. These are not erasable. Each time the unit sees a full
trigger, the older of the two triggers in memory will be replaced by the new trigger. To access long term event
history:
1.
With the ignition off, press and H
HO
OLLD
D the Valet®/Program switch.
2.
Turn on the ignition.
LLEED
D FFLLA
ASSH
HEESS
SSH
HU
UTTD
DO
OW
WN
N M
MO
OD
DEE
One
Timed out
Two
Over-rev shutdown
Three
Low or no RPM
Four
Transmitter shutdown (or optional push-button)
Six
(-) Shutdown (H3/3 GRAY) or (+) Shutdown (H3/4 BROWN)
Seven
(-) Neutral safety shutdown (H3/6 BLACK/WHITE)
Eight
Wait-to-start timed out
ttoo ppeerrffoorrm
m sshhuuttddoow
wnn ddiiaaggnnoossttiiccss