Directed Electronics SR6000 - Manual (Page 21)

IIM MP PO OR RTTA AN NTT!! Never use this wire to drive anything but a relay or a low-current input! The tran-
sistorized output can only supply 200 mA of current. Connecting directly to a solenoid, motor,
or other high-current device will cause it to fail.
sseeccoonnddaarryy hhaarrnneessss ((HH22)) wwiirree ccoonnnneeccttiioonn gguuiiddee
This wire provides a second unlock output for progressive locks. Refer to document 1041— Door Locking System
Wiring Guide for specific applications.
This wire provides 200 mA programmable output. (See Feature Descriptions section of this guide.)
IIM MP PO OR RTTA AN NTT!! Never use this wire to drive anything but a relay or a low-current input! This tran-
sistorized output can only supply 200 mA, and connecting directly to a solenoid, motor, or other
high-current device will cause the module to fail.
This wire provides 200 mA programmable output. (See Feature Descriptions section of this guide.)
IIM MP PO OR RTTA AN NTT!! Never use this wire to drive anything but a relay or a low-current input! This tran-
sistorized output can only supply 200 mA, and connecting directly to a solenoid, motor, or other
high-current device will cause the module to fail.
H H2 2//3 3 V VIIO OLLEETT//B BLLA ACCK K 2 20 00 0 m mA A ((--)) p prro og grraam mm maab bllee cch haan nn neell 4 4 o ou uttp pu utt
H H2 2//2 2 W WH HIITTEE//B BLLA ACCK K 2 20 00 0 m mA A ((--)) p prro og grraam mm maab bllee cch haan nn neell 5 5 o ou uttp pu utt
H H2 2//1 1 LLIIG GH HTT B BLLU UEE ((--)) 2 20 00 0m mA A 2 2n nd d u un nllo occkk o ou uttp pu utt