Interlogix NX-1710E User Manual

Page 2

NX-1710E Single Door Control

™

is a trademark of the GE companies. Printed in the USA.

These instructions do not purport to cover all details or variations in equipment nor to provide every
possible contingency to be met during installation, operation, and maintenance. If further information is
desired or if particular problems arise that are not covered sufficiently for the purchaser’s purpose, the
matter should be referred to GE Security, Gladewater, Texas, USA.

This document contains proprietary information of GE Security, USA and is furnished to its customer solely
to assist that customer in the installation, testing, operations, and/or maintenance of the equipment
described. This document shall not be reproduced in whole or in part nor shall its contents be disclosed to
any third party without the written approval of GE Security.

Please refer to the current GE Security product catalog for detailed warranty information.

Symbol Legend

Warning

Indicates a procedure, practice, condition, or statement that, if not strictly observed, could
result in personal injury.
* This symbol indicates electrical warnings and cautions.

Caution

Indicates a procedure, practice, condition, or statement that, if not strictly observed, could
result in damage to or destruction of equipment or property.
** This symbol indicates general warnings and cautions.

Note

Indicates an essential or important procedure, instruction, condition, or statement.

Tip

Indicates a user tip. Provides helpful information that is not normally defined in regular use,
but from an experienced user.

Enter

Indicates a key or button should be pressed to enter data.