AltiGen MAXCS 7.0 Update 1 Upgrade Guidelines - Manual (Page 4)

AltiGen Communications, Inc. MAXCS 7.0 Update 1 Upgrade Guidelines Page 4 of 6
 IP address is in the IP dialing table list
 IP address is in the SIP Allow IP list
 The caller is from another AltiGen system
 The caller is from an AltiGen IP phone
The filter is disabled by default. To enable the filter, add the following registry entry and press VM&SP
Log Dump under the Diagnostics > Trace menu (or just restart the system).
HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\AltiGen Communications, Inc.\AltiWare\Service
Providers\SIPSP
"BlockSIPUnauthorizedCall"=dword:00000001
Software Upgrade Path
The diagram on the next page shows the software upgrade path (not license registration) to convert older MAXCS
databases to the 7.0 Update 1 version.
It is critical to follow the upgrade instructions to avoid losing configuration data.
Note: If you are upgrading from release 6.5 or earlier, you have two options:
• You can rekey the data in Release 7.0 Update 1, or
• You can upgrade to release 6.5 Update 1, and then upgrade from 6.5 Update 1 to Release 7.0 Update 1