Kistler-Morse KM ultrawave User Manual

Page 75

UltraWave Series

10 Display

3. Scroll with the arrow keys to the 90 Service Menu option. Press Enter. The display shows:

Service Menu

91 Access

4. Press Enter. Then select User, press Enter. Use the keypad to enter a one-, two-, three-, or four-digit

number. Press the Enter Key when done entering the number. The display flashes a message
acknowledging the entry and returns.

Note: Record the access code and store it in a safe place. If misplaced, call Kistler-Morse for instructions
on how to bypass the code.

Once the number is entered, you have access to all functions and hidden menus that require the code,
while you remain within the Manual Mode (i.e. you will only need to enter the code one time per Manual
Mode session, regardless of the number of functions and channels you access). The supervisor Mfg
Code (see below) has precedence over the Kistler-Morse Service Code (same as Mfg Code). If you enter
the Mfg Code in the Kistler-Morse function under the Access Menu, the UltraWave Series controller will
not require you to enter the Kistler-Morse Service Code when you change values in the Service Menu.

5. Press the Esc Key to scroll up the menu tree or the Scan/Hold Key to return the display to vessel

monitoring. The Access Code is ‘activated’ when you leave the Manual Mode. Upon returning to the
Manual Mode and reentering the menu tree, you will be prompted to enter the code if you attempt to
change a system parameter. But, you will be prompted to enter the code only the first time you attempt
to change a system parameter within one Manual Mode session (i.e., you will only need to enter the
code one time per Manual Mode session, regardless of the number of parameters you change and
channels you access).

Kistler-Morse

The UltraWave Series has two factory code numbers. Certain troubleshooting functions require one of these
code numbers be entered before access to the function is permitted. The Service Code, described earlier in this
chapter, is entered when prompted by the display and is the same as Kistler-Morse Mfg Code. The Mfg Code is
entered when in the Access Menu, as described below:

Kistler-Morse Mfg code

The Kistler-Morse Mfg Code is required to access hidden

menus, which are typically only used by Kistler-Morse

Meters personnel for troubleshooting and testing the

equipment. The Kistler-Morse Mfg Code number is:

9111

97-1163-01 Rev. D