Industrial Data Systems IDS DT200 - Manual (Page 21)

19
4.2.2 CLEAR MEMORY
The CLEAR MEMORY key is used to clear totals, erase id memory, initialize the DT210
system.
1. Press the CLEAR MEMORY key.
2. If the password is enabled the DT210 will prompt "ENTER PASSWORD". Enter the
password if needed.
3. The CLEAR MEMORY menu is now available.
CLEAR TOTALS -- Erase id total registers.
ERASE MEMORY -- Erase all id information.
INITIALIZE SYS -- Erase memory and initialize the DT210 system
variables.
Press the CONTINUE key to select a clear memory function.
Press the ENTER key to activate a clear memory function.
4.2.3 CONFIGURE
The CONFIGURE function is described in SECTION 3.
4.2.4 TIME
The TIME key is used to display the time and date.
1. Press the TIME key.
2. The DT210 displays date and time on the alpha and numeric displays in the form:
NUMERIC DISPLAY 02-35 P For 2:35 p.m.
ALPHA DISPLAY 05 JUL. 87 For July 5, 1987.
4.2.5 DATE
The DATE key performs the same as the TIME key.