Audio Damage Bitcom User Manual
Page 7
Bitcom’s bits buttons and flag buttons are shown in the image
on the right.
The numbers across the top enumerate the steps. Each step’s
buttons are arranged in a column, with the bits buttons on top
(as suggested by the cunning placement of the word “BITS”
on the right) and flag buttons below. We’re going to work with
just one set of bits buttons, the first one on the left. You’ll see
it peeking out on the left in the following screen shots.
If we turn on all of the bits, the output signal is passed with nearly no distortion. It looks so much like the
input signal that you won’t see any difference, given the resolution of the image
1
:
1
The oscilloscope screenshots were created with the Tone Generator and Scope plug-ins that are part of Studio One, a
product of PreSonus Audio Electronics, Inc.