acidlab Miami - Manual (Page 18)

18
Track Play Mode
The memory of a new Miami is empty and a track must first be
programmed!
A track is a sequence of different patterns from a pattern group.
Once you have programmed one of Tracks 1-12 in Track Write Mode, you can
use this mode to play the track back. Use the Pattern Group rotary switch to
select it.
There is one track is available for every Pattern Group.
When changing tracks, the newly chosen track will start after the end of the
current pattern. The track will start with its first pattern. If you switch to
Pattern Play Mode, pattern 1 of the current pattern group will be selected.
Track Play Mode can only be used to select and playback the programmed
tracks.
The Start/Stop Button will return the track to the beginning, where it will start
again from the first pattern in the track.
Track Write Mode
In this mode, you can select and order patterns to form a Track. The Track
can then be played back in Track Play Mode.
To program a track, select the track in Track Play Mode. When you switch to
Track Write mode, the track will be erased, and a new track can be
programmed in its place.
Playing back patterns is the same as in Pattern Play Mode. However, you can
only play patterns from the pattern group currently selected with the rotary
switch.