acidlab Miami User Manual
Page 15
15
Selecting an instrument
To select an instrument to program (or the Accent), hold the Inst./Select button
while pressing one of the Instrument buttons. (AC, BD, ... )
When the Inst./Select Button is held down, the currently selected Instrument is
indicated by the LED above the corresponding instrument button. When the
Inst./Select button is released, the pattern of this instrument is displayed by the
LEDs over the Step Buttons (1-16)
Programming and Erasing an Instrument
By pressing one of the Step Buttons (1-16) you can write the selected
instrument to that step in the pattern. The LED above the Step Button will light
up. When the button is pressed again, the instrument will be deleted from the
step.
Clear Pattern (Pattern Step Write Mode)
The entire pattern can be deleted by pressing the Clear Button and the
Instrument Select button at the same time.