acidlab Miami User Manual
Page 12
12
Clear all Instruments
All of the instruments programmed on a step can be erased by pressing the
Clear button and the Inst./Select button simultaneously.
If the Clear Button and the Inst./Select button are held for a longer period, all
instruments will be erased from the steps the sequencer passes through
during the time the buttons are held.
By holding the Clear Button and the Inst./Select Button for the duration
of an entire pattern, you can erase the entire contents of a pattern or
pattern chain.
Pattern Length Programming (Pattern Tap Write Mode)
By pressing the Length Button and one of the Step Buttons (1-16)
simultaneously, you can choose the last step of the pattern.
For example, if the Length Button and and the button at step 12 is pressed, the
pattern will be 12 steps long; after running through the first 12 steps, the
pattern will repeat. The pattern length will stay the same even when changing
to another mode. The unplayed steps after the last step remain in memory.