Panasonic KX-F220 - Manual (Page 44)

POLLING
Polling is that you call the other station{s) to retrieve the document.
The other party must know in adovance that you will call, and must insert a document on the document tray.
You also need to program a polling password before transmission. This “POLLING" function may be performed
between the FAX’S which have the same protocol.
Programming the Polling Password
The first step in using the polling feature is to program your polling password. The password is a 4-digit number, which is
checked during the polling operation. If the password of the polling unit and that of the unit being polled do not match,
polling cannot take place.
MENU
Press MENU 4 times.
•The PROGRAM indicator will light.
•This display will appear.
PROGRAM [1. DATE 2. TEL
3. SYSTEM 4. REPORT]
Press then press “25”.
25. POLLING PASSWORD
=0000
ABC 2 -► JKL 5
Example: Password is 1234.
■►[
SET
MENU
Enter your polling password, then
press SET to store it into memory.
•To correct an error while
programming; press CLEAR, and then
enter correct input.
Press MENU to end the operation.
25. POLLING
=1234
PASSWORD
PROGRAM [1. DATE 2. TEL
3. SYSTEM 4. REPORT]
THU JUN 29 3:00 PM 00
NOTE:
If the polling password is set to "0000", the unit does not check password.
The polling is allowed only between KX-F220’s which have same polling password programed.
1-23