The tx (transmission) speed setting, Note, Changing parameter – Panasonic KX-F220 User Manual
Page 122: System programming functions, Tx speed
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
SYSTEM PROGRAMMING FUNCTIONS
(CONT.)
TX SPEED
The TX (Transmission) SPEED setting;
The unit can automatically establish the optimum transmitting speed depending on the line condition and other
facsimile machines transmission speed.
9600 BPS: The maximum speed is 9600 Bit Per Second (Default).
If you experience problems frequently (e.g. Transmitting error during transmission mode) caused
by poor line condition, set to “4800 BPS”.
4800 BPS: The maximum speed is 4800 Bit Per Second.
NOTE:
If the START indicator usually flashes for more than 20 seconds after pressing the START/COPY button, the unit will
change to “4800 BPS” automatically.
Changing parameter
MENU
Press
MENU
4 times.
•The PROGRAM indicator will light.
•This display will appear.
PROGRAM[1.DATA 2.TEL
3.SYSTEM 4.REPORT]
Press “#”,then press
“17”.
17.
TX
SPEED=9600BPS
[1.9600 2.4800]
Example;
Changing to “4800 BPS”.
Press
“2”,
then press
SET.
LID
SET
17.TX SPEED=4800BPS
[1.9600 2.4800]
PROGRAM[1.DATA 2.TEL
3.SYSTEM 4.REPORT]
MENU
Press
MENU
to end the operation.
THU JUN29 3:00PM 00
4-13