Panasonic NV-SD250 - Manual (Page 6)

infra-red Remote Controller
17
POWER (TV)
To switch the TV from on to standby mode or vice
versa. In standby mode, the TV is still connected to the
mains,
•With some TV models, it may only be possible to
switch the TV to standby mode using this button.
In this case, use TV/AV or\/' /\ (TV) to switch the
TV on.
TV/AV
T 0 select the TV input.
POWER (VTR)
To switch the VTR from on to standby mode or vice
versa. In standby mode, the VTR is still connected to
the mains.
OSD
For the On Screen Display Function.
REW (REWIND)
In the stop mode:
In the playback mode:
In the rewind mode;
"«!" is lit.
PLAY
To start playback. ‘ i>'
To rewind the tape
To search backward
To obtain high speed picture
During playback: Still picture.
During recording; To interrupt recording.
8 REC
To start a recording.
• Press both buttons simultaneously.
9 V/^(VTR)
To select the required programme position {TV station)
of the VTR.
10 TRACKING/V-LOCK
For manual tracking adjustment
The + and - buttons are used to adjust the tracking
when, for example, noise bars on the picture are better
removed manually than by the automatic digital
tracking control. After making a manual adjustment,
press both buttons together to return to automatic
digital tracking control.
For slow tracking adjustment
When noise bars appear during Still or Slow playback,
switch over to slow playback and adjust with the + or
- Button to reduce the noise bars.
For vertical locking adjustment
Use the + and - buttons to minimize any vertical jitter
during still-picture playback.