Panasonic NV-SD250 - Manual (Page 17)

Preparations for
G-Code Programming
Storing TV Broadcasts into your VTR
Preparations for G-Code Programming
Identification numbers must be set for G-Code
programming. Simply proceed with the G-Code
programming operation described on page 24. and the
identification numbers of the TV stations concerned will be
set automatically. This means that G-Code programming is
possible even without performing the operation described
on this page. However, you can follow the setting
procedure described below if you wish to set the
identification numbers of all the TV stations prior to actual
programming.
“Identification numbers’’ refer to the numbers used for
identifying the TV stations.
The programme positions on the VTR receiving the TV
stations are set in these identification numbers.
Have a newspaper or magazine on hand which lists today's
local TV station programmes and G-Code numbers.
Preparations
•Set the clock of the VTR. See page 14.
•Store TV broadcasts into your VTR. See pages 15 and 16.
•Confirm that the TV is on and the VTR viewing channel is
selected.
• Turn on the VTR.
• Press VTR/TV to select the VTR mode.
(Only for NV-SD250EA.)
Operations On Screen Display
Press MENU.
Q
050 MENU
•LANOUAOE
CLOCK SET
TUNER PRESET
OPCODE CH SET
BLUE BACK
DEMONSTRATION
Select G-CODE CH SET.
0
□
OSD MENU
language
CLOCK SET
TUNER PRESET
•Q-CODECHSET
BLUE BACK
DEMONSTRATION
SELECT :SQ, enter
END :MENU
3 Select the identification number
(001-255).
0
0
Q.COOE CH SET
S6LECT:0|1 -Z+iDD
BID :MENU
A Press ◄ or ► and then select the
^ programme position (1-42, AV).
Cl
.C
-K-i
c
CO
0 0
0
0
G-CODE CH SET
E CH QU,
OOl - -1/
SELECT: Da ‘/4-tQfl
end :MENU
•To set the other TV stations, press ◄ or ► and then
repeat steps 3 and 4.
C Press MENU twice.
^ □
Note:
To receive satellite stations, the satellite receiver must be
connected to the VTR and programme position must be set
depending on the type of the connection mode.
AV: When the satellite receiver is connected to the
Audio/Video input sockets.
•When the satellite receiver is connected by means of the
RF coaxial cable, set to a free programme position
between 1 and 42.
For Example: (NV-SD250A)
TV Station
Programme
Position on VTR
Identification
Number
ABC 2 002
ATN 7 007
TCN 9 009
TEN 10 010
SBS
_______________
28
_______________
028/001
For Example: (NV-SD250EA)
TV Station
Programme
Position on VTR
Identification
Number
TV ONE 1 001
CHANNEL2 2 002
TV3 3 003
SKY TV MOVIES 4 004
SKY TV SPORTS 5 005
SKY TV NEWS 6 i 006
I CTV 7 007
ACTION TV 1 3 008
17