Panasonic SC-DV100 - Manual (Page 57)

Using an external unit
INPUT SeiECTOR ' 1 1 I I I ‘ I
. - I I ,
I /- L /■' ■■ • C '■ ' ' /1
. t t I □
• Before connecting, reduce the volume level.
•Avoid listening for prolonged periods of time to prevent hearing
damage.
• Plug type: 3.5 mm stereo
During connection, Dolby Digital ( 5 . 1 ch) sources are automatically
down mixed to 2 channel stereo and the system prohibit the operation
of Dolby surround system.
This unit resumes the previous condition when the headphones are
disconnected.
Press [INPUT SELECTOR] to select the exter­
nal source.
Each time you press this button, sound sources will be switched
as follows.
TUNER^DVD-»TAPE
t 1
VDP (AUX)^VCR (EXT)
Operate the external unit which you have con­
nected to the system.
Refer to your equipment's operating instructions.
Follow steps Q-Q on page 42.
Q Press [INPUT SELECTOR] to select the exter­
nal source.
Press [• REC PAUSE].
5^ Press [O] or [t>].
Q Start playing the source to be recorded.
Refer to your equipment's operating instructions.
To stop recording
Press [■] on the cassette deck.
To briefly interrupt recording
Press [• REC PAUSE].
The cassette deck will go into the recording standby state.
To resume recording
Press [<] or [>] corresponding to the direction.
First, select the source with [INPUT SELECTOR].
Start recording on an external unit, and then start playing the source
to be recorded.
£
o
■O
c
o
k.
0 )
E
RQTS056