Panasonic PV-4664 - Manual (Page 29)

With the proper audio mode
setting, your VCR can:
1) record and playback an MTS stereo
broadcast (main language) in stereo Hi-Fi.
2) record and playback a monaural
broadcast (main language) or Second
Audio Program (second language) on
the Hi-Fi tracks for better quality
monaural sound.
3) playback non Hi-Fi tapes in monaural.
Selecting the Audio Mode for Recording
Select the type of broadcast and sound track you wish to record.
SAPrHi-R
О
Push SAP/Hi-Fi repeatedly
(each press within 5
seconds) to select the
desired audio mode
(STEREO/SAP/MONO).
• Please refer to “Receivable
Broadcast Types” section on
previous page.
The currently selected
audio mode is indicated
with an arrow.
Do a recording.
See the “Record On a Tape" section on page 18.
When purchasing or
renting prerecorded tapes,
remember that only those
recorded in Hi-Fi stereo will
play back with true stereo
sound. Standard stereo
tapes will play back with
monaural sound.
In order to listen to Hi-Fi stereo playback,
the VCR AUDIO (UR) jacks must be
connected to a stereo TV or stereo amp
and speakers. (See previous page.)
When adjusting the tracking during
playback, the Hi-Fi audio sound may revert
to normal audio sound. This is normal.
There may be a difference in audio level
between Hi-Fi and normal audio playback.
Selecting the Audio Mode for Playback
Select the type of sound track you desire for playback.
SAP/Hi-F
o
you oesire tor playback.
Push SAP/Hi-Fi repeatedly
{each press within 5
seconds) to select the
desired audio mode
(HIFI/NORMAL).
• Please select HIFI to listen to
your stereo recordings with
stereo sound or MONO for
monaural sound.
H I F I
NORMAL
The currently selected
audio mode is indicated
with an arrow.
Playback the tape.
See the “Playback a Tape” section on page 17.
Spatializer Feature
This feature allows you to enhance the stereo sound so that it seems to
completely surround you.
Note; Your VCR needs to be hooked up to a stereo TV or stereo amp/receiver
with speakers (see page 28). For playback, tapes must be recorded in Hi-Fi
stereo. For TV viewing, programs must be broadcast in stereo.
SPATIALIZER
О
SPATIALIZER HIGH
i
SPATIALIZER LOW
SPATIALIZER OFF
Push SPATIALIZER
repeatedly to choose
the desired setting.
• Each push will change the
display in the order shown.
Portions of this product manufactured under a licence from Desper Products,
Inc. SPATIALIZER, and the circle-in-square device are trademarks owned by
Desper Products, Inc.
To Select Audio Mode From Menu
1 Push MENU to display the menu.
2 Rotate and push Wheel to select
SET UP VCR from menu.
3 Rotate and push the Wheel to select SET AUDIO MODE.
4 Push the Wheel to set the desired audio for
listening or recording.
• For recording, set to “STEREO”, "SAP", or “MONO”.
• For playback, set PLAY AUDIO to “Hi-Fi”, or “MONO”.
5 Push MENU three times to exit this mode.
.............SET UP VCR..............
REPEAT PLAY : ON
BEEPER
: ON
INPUT SELECT • TUNER
SET AUDIO MODE
SET UP COMMERCIAL ADV.
SELECT
SET
END
ROTATE WHEEL
PUSH WHEEL
PUSH MENU KEY
------- SET AUDIO MODE -----------
; STEREO
PLAY AUDIO : HIF1
SELECT : ROTATE WHEEL
SET : PUSH WHEEL
END ; PUSH MENU KEY
29