Panasonic PV-4664 - Manual (Page 12)

One Time VCR Setup
When the VCR power is first turned
on, the language select screen
automatically appears.
Follow along in the manual as you are
guided through the setup procedure
on the screen.
I
\Xcheck list before you begin.
Q All TV and VCR connections are made.
(See pages 6-9.)
On-Screen Language, Cable box/ DSS receiver
Setup, Channel Memory, and Auto Clock
Turn the TV and VCR
power on.
Tune your TV to the VCR channel {the same channel you
set on the back of the VCR, CH3 or CH4). (See page 6.)
VCRn’V CHANNEL
Up/Down
Using the Select/Set Wheel
There are basically two types of Wheel operation.
• Selecting items from an on-screen display.
• Entering information, such as setting the clock.
OPERATION
© Rotate
(up or down)
ROTATE TO SELECT
Push
(like a button)
ROTATE TO SELECT
C
to make selection to enter selection
VCR
Q
CH
CH
0
VCR/
TV
or
or
Push VCR CH ▲ for
English on-screen
displays.
Push VCR CH T for
Spanish on-screen
displays.
Push VCR/TV for
French on-screen
displays.
This screen appears
a few seconds later.
SELECT LANGÜAGE
PUSH VCR CH a : ENGLISH
PULSE VCRCH T ; ESPAÑOL
APP. VCR/TV : FRANÇAIS
If you set the wrong
language,
see the “Reset all VCR
Memory Functions”
section on page 5.
• You can also set by
using the same
buttons on the VCR.
IMENU
Push MENU for YES or
PROG for NO.
ARE YOU USING A CABLE
BOX OR DSS RECEIVER?
PUSH MENU KEY
PUSH PROG. KEY : YES
; NO
If YES, continue with next step.
If NO, go to Alternate
Instructions on page 14.
Rotate and push the
WHEEL to select your
equipment connection
method. (Refer to page 10.)
If “CABLE/DSS BOX- VCR- TV,"
go to step 6.
If not, go to Alternate
Instructions on page 14.
- CABLE/DSS BOX SET UP -
SELECT YOUR CABLE BOX OR
DSS RECEIVER SET UP,
ABLE/OSS BOX-VCR-TV
VCR-CABLE/DSS BOX-TV
SELECT
SET
END ROTATE WHEEL
PUSH WHEEL
PUSH MENU KEY
Rotate and push the
WHEEL to set your Cable
box or DSS receiver
output channel,
(the channel
you tune the TV to in order to
watch cable or DSS stations).
- CABLE/DSS BOX SET UP -
ENTER CABLE BOX OR DSS
RECEIVER OUTPUT CHANNEL
ED
SELECT
SET
END ROTATE WHEEL
PUSH WHEEL
PUSH MENU KEY
If both a cable box and DSS receiver is used, set the
output channel of the DSS receiver.
If you are using Audio/Video jack connections, set
VIDEO OUT as the output channel.
Rotate and push the
WHEEL to select YES
or NO.
If YES continue with next step.
If NO, go to Alternate
Instructions on page 14.
- CABLE/DSS BOX SET UP -
DOES YOUR CABLE BOX OR
DSS RECEIVER HAVE
WIRELESS REMOTE CONTROL?
NO
SELECT : .ROTATE WHEEL
SET PUSH WHEEL
END PUSH MENU KEY
12
Continued on the next page.