Common specifications, Power supply, Fax/copy feature – Panasonic KXFLM600NZ User Manual
Page 131: Applicable lines: document size, Halftone level, Modem speed
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
?"K>Specificatioris
Technical data about this product
Common specifications
Laser Diode Properties:
Operating Environment:
Dimensions (HxWxD):
Mass (Weight):
Power Consumption:
Laser output:
5 mW max
Wave length:
760-800 nm
Emission duration:
Continuous
10 “C - 32.5
°C
(50 “F - 90.5
°F),
20 % - 80 % RH {Relative Humidity)
422 mmx430 mmx212 mm (165/8"x 16i5/i6"x8iV32")
Approx. 12.2 kg (26.9 lb.)
Standby:
Approx. 40 W
Power save*:
Approx. 10 W
Transmission:
Approx. 12 W (Power save)
Approx. 42 W (Standby)
Print (Copy or Reception): Approx. 200 W
Maximum:
Approx. 480 W
220-240 V AC, 50/60 Hz
Power Supply;
*lf this product is not used for 5 minutes, it will change to power save mode.
Fax/Copy feature
Applicable Lines:
Document Size:
Effective Scanning Width;
Effective Printing Width:
Transmission Time*:
Scanning Density:
Halftone Level:
Scanner Type:
Printer Type:
Data Compression System:
Modem Speed:
Memory Capacity:
Public Switched Telephone Network
Max. 216 mm (872") in width
Max. 600 mm (23%") in length—STANDARD/FINE/HALF TONE mode
Max. 420 mm (16^732") in length—SUPER FINE mode
208 mm
(87i6")
208 mm (OVie")
Approx. 8 s/page (ECM-MMR)**
Horizontal: 8 pels/mm (203 pels/inch)
Vertical:
3.85 lines/mm (98 lines/inch)—STANDARD mode
7.7 lines/mm (196 lines/inch)—FINE/HALF TONE mode
15.4 lines/mm (392 lines/inch)—SUPER FINE mode
64-level
CIS (Contact Image Sensor)
Laser beam printer
Modified Huffman (MH), Modified READ (MR),
Modified Modified READ (MMR)
14,400 /12,000 / 9,600 / 7,200/4,800 / 2,400 bps; Automatic Fallback
Approx. 120 pages of memory transmission/reception/copy
(Based on the CCITT No. 1 Test Chart In standard resolution.)
CCITT No. 1 Test Chart
*Transmission speed depends upon the contents of the pages,
resolution, telephone line conditions and capability of the
receiving unit.
*The 8 second speed is based upon the CCITT No. 1 Test Chart.
131