Panasonic NV-G25 Series - Manual (Page 12)

PLAYBACK Preparation
•Make sure that the Tinner Record Button is set to “Off".
•Insert a recorded video cassette.
When a video cassette is already inside the VTR, press
the VTR On/Off Switch to turn it on.
•Turn the TV set on and select the video playback channel.
•Make sure that Edit Switch is set to “Off”.
ifli
Reset/Index Button
Memory/Search Button
cp
Ò.o„^
TR A( KING------- SLOW PICTJRE
Tracking Control Picture Sharpness Control
Auto Operation
When inserting a video cassette which has the erasure
prevention tab removed playback will start automatically.
Rewind and Fast Forward
Press the Rewind ◄◄/Review © Button to rewind the
tape.
REW/S3
« Ì
Press the Fast Forward ►►/Cue © Button to wind the
tape forward rapidiy.
®/FF
»
Memory Function
The Memory function makes it simple and fast to find a
certain position on the tape later again, simply by pressing
the Reset/Index Button at that position to set the tape
counter to “0:00.00” and by pressing the Memory/Search
Button. During Rewind or Fast Forward, the tape will then
stop at approximately the desired position.
Memory —
Indication
COUNT
n • n n n n
u • u u. u u
Lap Time Counter
It shows the elapsed recording or playback time.
✓ --------------------------------------------------------- ------------
_ n • n n n n
u • u u . u u
Hours I Seconds
Minutes
The indication will appear when the tape is
rewound further than the tape counter position
“ 0 : 00 . 00 ”.
If the figures on the Tape Counter do not change
during Fast Forward, Rewind or any of the playback
functions, this means that nothing is recorded on that
tape section. The Tape Counter is automatically reset
to “0:00.00” when the video cassette is ejected.
Normal Playback
ID
Press the Play Button {►).
REC
•Adjust the Tracking Control on the VTR if the image is
partially obscured by bands of noise.
•Control the picture as you like with the Picture
Sharpness Control (sharp or soft contours).