Panasonic NV-G25 Series - Manual (Page 10)

SETTING THE TUNER IN
THE VTR
The tuner in the VTR makes it possible to receive TV
broadcasts and to record these programmes without having
to turn on the TV set, The reception channels in the TV
bands shown on the right can be received
0-5 5 A-11 21-69
1-3 4-11 21-69
The tuner in the VTR can be preset with up to 16 stations.
channel.
•Press the VTR On/Off Switch to turn the VTR on.
•Set the VTR/TV Selector to “VTR".
Tuning Procedure
O Press the Preset/Nornnal Button.
The indication on the Multi-Function Display changes
from the clock indication to the position indication.
© Press the Channel Up or Down Button to select a
programme position (channel) which you want to tune
to a TV station.
O Press the BAND/AFC Button to select the “1", “HI”,
or “U” position.
/" N
Display of the programme positions 1-16
I o ;
^6- 1
Indication of the
selected TV band
J
Selection of the
programme position
O Press the Search (-<-) or (-) Button.
During the station search t
(The position indication *
flashes on and off.)
Tuned condition
I P O' /e
-^iMTTMrmrn^
b I
P o' !
b - I
•When the tuning of the station is completed, the
indication stops flashing and the tuned station is
automatically memorized.
•At every push of the SEARCH (-) or (-(-) Button, the
station will be tuned automatically.
Repeat steps 0~0 for each channel you want to tune to a
station.
0 Press the Preset/Normal Button again.
The indication on the Multi-Function Display changes
to the clock indication.
Blanking of Unoccupied Programme Positions
(T) Press the Preset/Normal Button.
(2) Press the Channel Up or Down Button to select a
programme position (channel) which you do not want
to tune to a TV station.
@ Press the Clear Button (“--” will be displayed in the
Programme Position Indication).
P o 1 6
•Repeat steps ( 2 ) and (|) for any programme positions
on which no stations are to be tuned. Afterwards,
these programme positions will be skipped during
Up/Down selection of the programme position.
•To return a blanked station to the former (unblanked)
condition, select the corresponding programme
position on the VTR and press the CLEAR Button.
@ Press the Preset/Normal Button again.
Fine Tuning Procedure
If fine tuning is necessary, for example for a weak station
which is close to a strong station:
1. Make sure that the Preset/Normal Button is in the Off
condition, i.e. the Multi-Function Display shows the
present time.
2. Press the Fine Tuning or Button to obtain the
best tuning condition.
•To return the tuning to its former state, press the
BAND/AFC Button.