FaxBack AudioCodes Mediant 1000 - Configuration Guide - Manual (Page 4)

AudioCodes Mediant 1000 Configuration Guide — Page 4
Initial Media Gateway Configuration
This document only covers basic configuration. For more information regarding these options, and more advanced configuration,
please refer to the AudioCodes Mediant 1000 manual which can be found on the AudioCodes documentation CD.
IMPORTANT: Changes you make will be lost when the device reboots, unless you click the Burn button at the top of the page.
Once you are done making changes, be sure to click “Burn”.
General Settings
Configuration > Media Settings > Fax/Modem/CID Settings
Fax Transport Mode RelayEnable
Configuration > Protocol Configuration > Protocol Definition > SIP General Parameters
Fax Signaling Method T.38 Relay
Detect Fax on Answer Tone Initiate T.38 on Preamble
SIP Transport Type UDP
Configuration > Protocol Configuration > Protocol Definition > Proxy & Registration
Use Default Proxy No
Configuration > Protocol Configuration > Protocol Definition > Coders
Only one entry should be present:
Coder Name G.711U-law
Packetization Time 20
Rate 64
Silence Suppression Disabled