Industrial Injection 5.9L Dodge Cummins Dual CP3 User Manual
Page 2

Dual Fueler CP3 Pump Kit 03-07 5.9L Dodge Cummins
Dual Fueler CP3 Pump Kit 03-07 5.9L Dodge Cummins
2
7
DISCLAIMER OF LIABILITY
This is a performance product which increases horsepower above and beyond factory specifications. As a result, more horsepower creates more stress
on the drivetrain components, which could result in drivetrain failure. This product is intended for off-road use only. Use at your own risk.
This agreement sets forth the terms and conditions for the use of this product. The installation of this product indicates that the Buyer has read and
understands this agreement and accepts the terms and conditions.
Industrial Injection Inc., its distributors, employees, and dealers (the “Seller”) shall not be responsible for the product’s proper use and service. The
buyer hereby waives all liability claims.
The Buyer hereby acknowledges no reliance on the Sellers skill or judgment to select or furnish goods suitable for any particular purpose and that
there are no liabilities which extend beyond the description on the face hereof, and the Buyer hereby waives all remedies or liabilities expressed or
implied, arising by law or otherwise (including without any obligation of the Seller with respect
to fitness, merchantability and consequential damages), or whether or not occasioned by the Seller’s negligence.
The Seller disclaims any warranty and expressly disclaims any liability for personal injury or damages. The Buyer acknowledges and agrees that the
disclaimer of any liability for personal injury is a material term for this agreement and the Buyer agrees to indemnify the Seller and to hold the
Seller harmless from any claim related to the item of equipment purchased. Under no circumstances will the Seller be liable for any damages or
expenses by reason of use or sale of any such equipment.
The Seller assumes no liability regarding the improper installation or misapplication of its products. It is the installer’s responsibility to check for
proper installation and if in doubt contact the manufacturer.
The Buyer is solely responsible for all warranty issues from the manufacturer.
LIMITATION OF WARRANTY
The Seller gives Limited Warranty as to description, quality, merchantability, and fitness for a particular purpose, productiveness, or any other matter of
Seller’s product sold herewith. The Seller shall not be responsible for the products proper use and service and the Buyer hereby waives all rights other
than those expressly written herein. This warranty shall not be extended, altered or varied except by a written instrument signed by Seller and Buyer.
The Warranty is limited to one (1) year from the date of sale and limited solely to the parts contained within the products kit. All products that are
in question of Warranty must be returned prepaid to the Seller and must be accompanied by a dated proof of
purchase receipt. All Warranty claims are subject to approval by Seller.
Under no circumstances will the Seller be liable for any labor charged or travel time incurred in diagnosis for defects, removal, or reinstallation of this
product or any other contingent expenses.
Under no circumstances will the Seller be liable for any damage or expenses incurred by reason of the use or sale of any such equipment.
In the event that the buyer does not agree with this agreement: the buyer may promptly return this product, in a new and unused condition in its
original packaging, with a dated proof of purchase to the place of purchase within ten (10) days from date of purchase
for a full refund.
The installation of this product indicates that the buyer has read and understands this agreement and accepts its terms and conditions.
16. Install Radiator Hoses 16b & 16c to Radiator Pipe and Radiator
using #17a and #17b hose clamps (fig.16a).
17. Disconnect oem fuel pump connector
c2
from stock fuel pump socket
c1
and
connect
control module Y connector
into
stock fuel pump
c1
and stock connector
c2
. (fig. 17a)
c1
c2
18. Route control module wiring from stock fuel pump as shown
below and connect
control module connector
to dual fueler as shown.
Route remaining control module to connect
Ground to chassy and
Power
to battery. Mount
#1 control module box
with
#19 Control
Module Mounting Screws
or
tie straps
.
control module connector
Ground
Power
#1 control module box
19. Check coolent levels, add coolent as needed.
fig. 16a
fig. 17a