Craftsman 917.28934 - Manual (Page 8)

NOTE: You may now roll your tractor off
the skid. Follow the appropriate instruction
below to remove the tractor from the skid,
A WARNING: Before starting, read,
understand and follow all instructions in the
Operation section of this manual. Be sure
tractor is in a well-ventilated area. Be sure
the area in front of tractor is clear of other
people and objects,
TO ROLL TRACTOR OFF SKID (See
Operation section for location and
function of controls)
1, Raise attachment lift lever to its highest
position.
2, Release parking brake by depressing
brake pedal.
3, Place freewheel control in disengaged
position to disengage transmission
(See ‘TO TRANSPORT" in the Opera­
tion section of this manual).
4, Roll tractor forward off skid.
5, Remove banding holding the deflector
shield up against tractor.
CHECK TIRE PRESSURE
The tires on your tractor were overinfiated
at the factory for shipping purposes. Cor­
rect tire pressure is important for best
cutting performance.
• Reduce tire pressure to PS I shown on
tires,
CHECK DECK LEVELNESS
For best cutting results, mower hous­
ing should be properly leveled. See TO
LEVEL MOWER" in the Service and
Adjustments section of this manual.
CHECK FOR PROPER POSITION
Al I C>IZ1 XC
Vi# 1^ lir»irM II# C w I m I W
See the figures that are shown for replac­
ing motion and mower blade drive belts
in the Service and Adjustments section
of this manual. Verify that the bells are
routed correctly.
CHECK BRAKE SYSTEM
After you learn how to operate your trac­
tor, check to see that the brake is operat­
ing properly. See TO CHECK BRAKE"
in the Service and Adjustments section of
this manual.
CHECKLIST
Before you operate your new tractor, we
wish to assure that you receive the best
performance and satisfaction from this
Quality Product,
Please review the following checklist:
All assembly instructions have been
completed,
/ No remaining loose parts in carton,
i/ Battery is properly prepared and
charged
Seat is adjusted comfortably and tight­
ened securely.
'/ All tires are properly inflated. (For ship­
ping purposes, the tires were overinfiated
at the factory).
Be sure mower deck is properly leveled
slde-to-side/front-to-rear for best cutting
results. (Tires must be properly inflated
for leveling),
Check mower and drive belts. Be sure
they are routed properly around pulleys
and inside all belt keepers,
^ Check wiring. See that all connections
are still secure and wires are properly
clamped.
Before driving tractor, be sure freewheel
control is in “transmission engaged"
position (see "TO TRANSPORT” in the
Operation section of this manual).
While learning howto use yourtractor, pay ex­
tra attention to the following important items:
y Engine oil is at proper level.
y Fuel tank is filled with fresh, clean, regular
unleaded gasoline.
i/ Become familiar with al! controls, their
location and function. Operate them
before you start the engine,
Be sure brake system is in safe operating
condition.
^ Be sure Operator Presence System and
Reverse Operation System (ROS) are
working properly (See the Operation and
Maintenance sections in this manual),
it is important to purge the transmission
before operating yourtractor for the first
time. Follow proper starting and transmis­
Sion purging instructions (See TO START
ENGINE” and “PURGE TRANSMISSION"
in the Operation section of this manual).
8