Craftsman 917.296040 - Manual (Page 14)

MAINTENANCE
MAINTENANCE
SCHEDULE
FILL IN DATES /
AS YOU COMPLETE /<
REGULAR SERVICE /^
/
f Co /
A?/
r
/ k/ / kj
f Cn / Cn / /
O' / O' / ^ /
a/
/^/^/ ' a . / a /
SERVICE DATES
/ /
Check Engine Oil Level ✓ ✓
Change Engine Oil
<2
Oil Pivot Points ✓
Inspect Spark Arrester / Muffler
✓
Inspect Air Screen ✓
Clean or Replace Air Cleaner Cartridge
Clean Engine Cylinder Fins ✓
Replace Spark Plug ✓
RH Gear Case Grease Fitting (loz.) ✓
1 - Change more often when operating under a heavy load or in high ambient temperatures.
2 - Service more often when operating in dirty or dusty conditions.
GENERAL RECOMMENDATIONS
The warranty on this tiller does not cover
items that have been subjected to op­
erator abuse or negligence. To receive full
value from the warranty, the operator must
maintain tiller as instructed in this manual.
Some adjustments will need to be made
periodically to properly maintain your tiller.
At least once a season, check to see if
you should make any of the adjustments
described in the Service and Adjustments
section of this manual.
• Once a year you should replace the
spark plug, clean or replace air filter,
and check tines and belts for wear. A
new spark plug and clean air filter as­
sure proper air-fuel mixture and help
your engine run better and last longer.
BEFORE EACH USE
1. Check engine oil level.
2. Check tine operation.
3. Check for loose fasteners.
LUBRICATION
Keep unit well lubricated (See “LUBRI­
CATION CHART”) .
LUBRICATION CHART
©Throttle Control
® SAE 30 OR 10W-30 Motor Oil
@ Refer to Maintenance “ENGINE” section
0 EP #1 Grease
14