Hudson Robotics Micro10x - Manual (Page 6)

6
The priming trough uses a short silicon drain tube and waste basin. The silicon
tube can be replaced with a longer one if needed. Standard silicon tubing will
work as a replacement (Figure 1.1.4).
Figure 1.1.4
1.2 - Plate Nest
Install the plate nest onto the nest holder. The legs of the plate nest should fit
snugly into the mounting position. The plate nest can be positioned in either the
portrait or landscape orientation. In Figure 1.2.1 you will see the plate nest in the
landscape orientation. You will need the 8-channel manifold to be installed if
using the MC10X in the portrait orientation.
Figure 1.2.1
Priming Trough