Great Plains DICKEY-john AI-120 12-inch Virtual Terminal - Manual (Page 146)

OPERATOR’S MANUAL
AI-120 Virtual Terminal
11001-1606B-201310
138 / VARIABLE RATE JOB SETUP
8. Press the Check button to write job data. All files are transferred to the
computer and stored to a folder named “TASKDATA”.
Figure 201
Write Job Data
IMPORTANT: Multiple prescription maps can be stored to the
TASKDATA folder for transfer to the terminal. The
TASKDATA folder name should be changed to a
different name if additional maps are transferred
separately. Renaming the TASKDATA folder for
additional file transfers avoids overwrite of existing
maps stored on the terminal that reside in the
TASKDATA folder.
9. Insert a USB memory device into computer. USB device should be
clear of any other files and formatted as a FAT32 device.
10. Copy the TASKDATA folder to the USB memory device or write direct
to the USB memory device.
11. Files are ready for transfer to terminal. Remove USB memory device
from computer and insert into terminal.
12. Refer to “Load a Variable Rate Map” section for map transfer to
terminal.