Installing the hardware, Windows 2000/xp pro, Chapter – Autocue WINCUE User Manual
Page 9
WINCUE USER GUIDE
CHAPTER 1 – INSTALLATION OF HARDWARE
9
AUTOCUE LTD. 2002
Installing the Hardware
This chapter covers the minimum requirements with the recommended specifications and the
installation of the hardware required to run the WinCue software.
1
Installing the Hardware
1.1
Minimum Hardware Requirements
The WinCue prompter will run either on the Windows 2000 or Windows XP Professional operating systems,
Windows XP Home or Windows ME are not supported. The minimum hardware requirements and recommended
specification for your prompter is as follows. Please note that you will require a SCSI card of the type specified
below:
Windows 2000/XP Pro
Pentium II 350 MHz processor (True Pentium chipset is required)
128MB RAM
50Mb free disk space
Adaptec SCSI card 2906 for desktop, Adaptec 1460 SlimSCSI PCMCIA
for laptop
PCI bus or VL bus graphics card (PCI preferred)
800x600 256 Colour VGA display (1024x768 is recommended)
1.2
The WinCue Package
The WinCue package consists of:
Laptop users will receive an
I.M.T. box, not the I.M.T.
scroll card
WinCue Software (1 CD)
License (1 diskette)
I.M.T. Scroll Card
Scroll Control
User Manual
Chapter
1