Brother HL-1070 User Manual

Page 74

USER’S GUIDE

6–12

Setting Up the Printer for Apple Macintosh Computers

When Using the Optional RS-100M Serial Interface

Question Recommendation
I cannot print from my
application software.

Make sure that the supplied Macintosh printer

driver is installed in the System Folder and it is
selected with Chooser.

Check the PORT selection within the Chooser: it

should match the port to which you physically
attached the printer cable.

The serial slide switch of the optional interface

board should be in the Apple (RS-422A) position.

Check the printer cable type: you cannot use a

LocalTalk or straight-through cable. Refer to

for details on printer cable type.