Dascom 2600 User Guide - Manual (Page 99)

Tally Dascom 2610
86
MTPL
IBM
XL24
IBM
AGM
Epson
LQ-2550
Epson
LQ-2170
Code Function
√ * * * * [ v Set vertical tab
√ √ [\ Perform relative horizontal step
√ \; Transparent mode for the characters following
√ ^ Transparent mode for the character following
√ _ Overline ON/OFF
√ √ √ √ 0 Set line feed to 1/8 inch
√ 1 Set line feed to 7/72 inch
√ √ √ √ 2 Set line feed to 1/6 inch
√ 2 Set line feed to n/72 inch
√ √ √ 3 Set line feed to n/180 inch
√ 3>n> Set line feed to n/216 inch
√ √ 4 Italics ON
√ √ 4 Set beginning of form
√ √ 5 Italics OFF
√ √ 5 Autom. line feed ON/OFF
√ √ 6 Print ASCII codes dec. 129 to dec. 159
√ √ 6 PC character set 2 (expanded)
√ √ 7 Suppress ASCII codes 129 to 159
√ √ 7 PC character set 1 (standard)
√ a Select orientation
√ √ √ A Line spacing n/60 inch
√ A Prepare line spacing n/72 inch
√ b<0> Clear all tabs
√ b<0> Set vertical tabs in channels
√ √ √ √ B<0> Clear all vertical tabs
√ √ B...<0
>
Set vertical tabs
√ √ B...<0
>
Set vertical tabs
√ c Reset to initialization status
√ c Setting the horizontal motion index (HMI)
√ √ √ √ C<0> Set form length in inches
√ √ √ √ C Set form length in lines
√ √ √ d Perform relative horizontal step
√ √ √ √ D<0> Clear all horizontal tabs
√ √ √ √ D...<0
>
Set horizontal tabs
√ √ Condensed printing OFF
√ √ Double-wide printing OFF (set with or )