Dascom 2600 User Guide - Manual (Page 66)

Tally Dascom 2610
53
Example 2
Changing an entered value menu option.
In this example, we are modifying the selected form length to a different form length. Select
“Forms”. A new page appears:
Select the Form Length field by highlighting the contents of the box and enter the new form
length.
The acceptable parameters are listed to the right of the field. Select “Send”.
1) Changes are not applied until “Send” is selected.
2) If the entered value is out of range of the acceptable parameters, the previous value will be
re-instated.
3) To reset the changed value to the prior value, select “Refresh” instead of “Send”. To return
to the prior page without applying the change, select “Back”.
4) The default name is “conf.cfg”, but it can be renamed. Saving the file to disk. This will allow
it to be transferred to other printers using the “Send Configuration To Printer” option on the
actions web page.