InnoMax Hardside Fluid - Manual (Page 5)

STEP 2: BUILDING THE PEDESTAL
Six Drawer Pedestal
A. Lay one three drawer section of the pedestal inside the
frame, recessed slightly on the side and at the head and foot as
pictured. If you purchased a two drawer section pedestal, use
the same procedure as the three drawer that is pictured.
B. Lay the second three drawer section of the pedestal inside
the frame as pictured.
C. Slide the wood pieces into the spaces between drawer
sections as pictured.
D. Be certain the assembled six drawer pedestal is accurately
centered within the frame in it’s final position.
E. Next, without letting it slide out of place, tilt the frame on to one
side. Avoid moving the pedestal. After Step 3 you will lower the
frame onto the deck boards which will be mounted on the pedestal.
STEP 2: BUILDING THE PEDESTAL
Twelve Drawer Pedestal
A. See directions for the Six Drawer Pedestal. Follow them
exactly first. Next add the third three drawer section on top of
half of the completed six drawer pedestal. This procedure also
works for two drawer section pedestals.
B. Add the fourth three drawer section as pictured.
C. Position the corners as accurately as possible, with special
care given at the foot of the bed since it is most visible.
4