Bryant 548J User Manual
Bryant Pumps
548J
SINGLE PACKAGE HEAT PUMP/ELECTRIC HEAT
NOMINAL 3 TO 8.5 TONS
WITH PURON
R
(R--410A) REFRIGERANT
Service and Maintenance Instructions
TABLE OF CONTENTS
SAFETY CONSIDERATIONS
1
. . . . . . . . . . . . . . . . . . . .
UNIT ARRANGEMENT AND ACCESS
3
. . . . . . . . . . .
SUPPLY FAN (BLOWER) SECTION
4
. . . . . . . . . . . . . .
HEAT PUMP REFRIGERATION SYSTEM
8
. . . . . . . . .
PURON
R
(R--410A) REFRIGERANT
13
. . . . . . . . . . . . .
COOLING CHARGING CHARTS
14
. . . . . . . . . . . . . . . .
CONVENIENCE OUTLETS
19
. . . . . . . . . . . . . . . . . . . .
HEAT PUMP CONTROLS
20
. . . . . . . . . . . . . . . . . . . . . .
PROTECTIVE CONTROLS
20
. . . . . . . . . . . . . . . . . . . . .
COMMERCIAL DEFROST CONTROL
21
. . . . . . . . . . .
ELECTRIC HEATERS
24
. . . . . . . . . . . . . . . . . . . . . . . . .
SMOKE DETECTORS
26
. . . . . . . . . . . . . . . . . . . . . . . . .
RTU--MP CONTROL SYSTEM
33
. . . . . . . . . . . . . . . . . .
ECONOMIZER SYSTEMS
47
. . . . . . . . . . . . . . . . . . . . .
WIRING DIAGRAMS
56
. . . . . . . . . . . . . . . . . . . . . . . . .
PRE--START-UP
58
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
START-UP, GENERAL
58
. . . . . . . . . . . . . . . . . . . . . . . . .
START-UP, RTU--MP CONTROL
59
. . . . . . . . . . . . . . . .
OPERATING SEQUENCE
62
. . . . . . . . . . . . . . . . . . . . . .
FASTENER TORQUE VALUES
67
. . . . . . . . . . . . . . . . .
APPENDIX I. MODEL NUMBER SIGNIFICANCE
68
. . .
APPENDIX II. PHYSICAL DATA
69
. . . . . . . . . . . . . . . .
APPENDIX III. FAN PERFORMANCE
71
. . . . . . . . . . .
APPENDIX IV. ELECTRICAL INFORMATION
82
. . . .
APPENDIX V. WIRING DIAGRAM LIST
96
. . . . . . . . .
APPENDIX VI. MOTORMASTER SENSOR
LOCATIONS
97
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
UNIT START-UP CHECKLIST
99
. . . . . . . . . . . . . . . . . .
SAFETY CONSIDERATIONS
Installation and servicing of air-conditioning equipment
can be hazardous due to system pressure and electrical
components. Only trained and qualified service personnel
should install, repair, or service air-conditioning
equipment. Untrained personnel can perform the basic
maintenance functions of replacing filters. Trained service
personnel should perform all other operations.
When working on air-conditioning equipment, observe
precautions in the literature, tags and labels attached to
the unit, and other safety precautions that may apply.
Follow all safety codes. Wear safety glasses and work
gloves. Use quenching cloth for unbrazing operations.
Have fire extinguishers available for all brazing
operations.
Follow all safety codes. Wear safety glasses and work
gloves. Use quenching cloth for brazing operations. Have
fire extinguisher available. Read these instructions
thoroughly and follow all warnings or cautions attached to
the unit. Consult local building codes and National
Electrical Code (NEC) for special requirements.
Recognize safety information. This is the safety--alert
symbol
. When you see this symbol on the unit and in
instructions or manuals, be alert to the potential for
personal injury.
Understand the signal words DANGER, WARNING, and
CAUTION. These words are used with the safety--alert
symbol. DANGER identifies the most serious hazards
which will result in severe personal injury or death.
WARNING signifies a hazard which could result in
personal injury or death. CAUTION is used to identify
unsafe practices which may result in minor personal
injury or product and property damage. NOTE is used to
highlight suggestions which will result in enhanced
installation, reliability, or operation.