Brother 1270N - Manual (Page 184)

APPENDIX
A-6
NOTE:
The descriptions printed in Print Configuration vary depending on the printer models or
countries.
2. Test Print (for HL-1030 only)
(1) Turn on the power switch of the printer while pressing the printer control panel button.
(2) Release the panel button when the Drum LED comes on.
(3) Press the panel button again and release it when the Drum LED comes on.
(4) Print the Test Print page.
The page counter and drum counter are printed at the bottom of the Test Print. (Refer to the
figure below.) Note that the drum counter is an actual page counter after a new drum unit is
replaced, and may be different from the drum unit life shown in the drum life bar. For details,
see
Section 2 ‘How to Read the Drum Unit Life’ .
Fig. A-2
NOTE:
The descriptions printed in Test Print vary depending on the country.
Page counter and
drum counter are
printed here.